CD Deck

Post by **Zerofactor** » Sat Aug 13, 2005 2:23 pm

Ok, so I bought a cd player deck for my car, spliced all the wires and hooked em up. Radio works fine, everything works. Except CD Audio. I put a CD in, it displays the track time and is reading, but no sound is coming out, although I'm getting sound for the radio tuner? wtf! I don't get it, anyone know of anything that may be causing this?

I bought an Aiwa CDC X144

Post by **Dark Metal** » Sat Aug 13, 2005 3:19 pm

You bought it at WalMart.

Post by **+JuggerNaut+** » Sat Aug 13, 2005 3:30 pm

cd as in a bought cd or a burned one? you sure you burned it correctly? did you try it on any other player?

p.s. nothing to do with your wiring. it's either your burn, or the player that's bad.

Post by **bitWISE** » Sat Aug 13, 2005 4:08 pm

Did you wire up the power antenna?

I had an issue with this before when I put a head unit in my Probe. For some weird ass reason I couldn't use both the power antenna and the amp lead because it caused the internal amp to turn off during cd playback. So what I did was wired the power antenna and amp leads together.

lead 1 -----\/----------- ant
lead 2 -----/\----------- amp

kinda like that

Post by **+JuggerNaut+** » Sat Aug 13, 2005 4:16 pm

bitWISE wrote:Did you wire up the power antenna?

I had an issue with this before when I put a head unit in my Probe. For some weird ass reason I couldn't use both the power antenna and the amp lead because it caused the internal amp to turn off during cd playback. So what I did was wired the power antenna and amp leads together.

lead 1 -----\/----------- ant
lead 2 -----/\----------- amp

kinda like that

his radio works.

Post by **bitWISE** » Sat Aug 13, 2005 4:20 pm

+JuggerNaut+ wrote:
bitWISE wrote:Did you wire up the power antenna?

I had an issue with this before when I put a head unit in my Probe. For some weird ass reason I couldn't use both the power antenna and the amp lead because it caused the internal amp to turn off during cd playback. So what I did was wired the power antenna and amp leads together.

lead 1 -----\/----------- ant
lead 2 -----/\----------- amp

kinda like that
his radio works.

Mine did too. I could listen to AM/FM without an external amp or I could listen to a CD without an internal amp. I think you are correct in saying the unit is fucked but that's how I worked around it.

Post by **+JuggerNaut+** » Sat Aug 13, 2005 4:24 pm

i'm under the assumption that he does not have an external amp. therefore, if his radio works, his internal amplifier is functioning proplerly.

interesting problem YOU had though. was that a Kenwood by chance?

Post by **bitWISE** » Sat Aug 13, 2005 4:49 pm

+JuggerNaut+ wrote:i'm under the assumption that he does not have an external amp. therefore, if his radio works, his internal amplifier is functioning proplerly.

interesting problem YOU had though. was that a Kenwood by chance?

No it was a Clarion. I got the unit off ebay but it was wrapped up like brand new. My Kenwood works pretty well but I don't think it sounds as nice as the Clarion did.

Post by **+JuggerNaut+** » Sat Aug 13, 2005 4:58 pm

what are you running for an amp?

Post by **bitWISE** » Sat Aug 13, 2005 5:24 pm

+JuggerNaut+ wrote:what are you running for an amp?

An old Rockford Fosgate Punch 500a2. I need to get a new amp (unsure) and a JL W7.

Post by **+JuggerNaut+** » Sat Aug 13, 2005 5:28 pm

difference between brand name HU's, sound quality wise, is pretty non-existant. do you know if they were both 2v pre-outs?

p.s. i wouldn't bother with a new amp unless you wanted more power. Punch amps have pretty good sound. the newer ones won't sound any better.

Post by **bitWISE** » Sat Aug 13, 2005 5:52 pm

+JuggerNaut+ wrote:difference between brand name HU's, sound quality wise, is pretty non-existant. do you know if they were both 2v pre-outs?

p.s. i wouldn't bother with a new amp unless you wanted more power. Punch amps have pretty good sound. the newer ones won't sound any better.

I just dont like the way its setup. I mainly want to have remote control of the gain. Plus if I manage to get a W7 I'll need more power.

I'm not using amps to run my full range speakers (yet). I always use the head unit. Could be that I had better imaging in the Probe or it could be that I prefer a 6.5 component set over a 3-way 6x9 component set.

Post by **SOAPboy** » Sat Aug 13, 2005 6:15 pm

Headunit is FUCKED

Aiwa..

Post by **+JuggerNaut+** » Sat Aug 13, 2005 7:44 pm

bitWISE wrote:
+JuggerNaut+ wrote:difference between brand name HU's, sound quality wise, is pretty non-existant. do you know if they were both 2v pre-outs?

p.s. i wouldn't bother with a new amp unless you wanted more power. Punch amps have pretty good sound. the newer ones won't sound any better.
I just dont like the way its setup. I mainly want to have remote control of the gain. Plus if I manage to get a W7 I'll need more power.

I'm not using amps to run my full range speakers (yet). I always use the head unit. Could be that I had better imaging in the Probe or it could be that I prefer a 6.5 component set over a 3-way 6x9 component set.

remote control gain? why? get an HU that's got sub level controls. if you have a 4v or > pre-out, your gain adjusting days are over anyway.

i'm not understanding your comment about a 6.5 component set. do you mean that you prefer one with the built in amplification?

Post by **Dave** » Sat Aug 13, 2005 7:47 pm

It's like tnf in a Kracus thread

Post by **+JuggerNaut+** » Sat Aug 13, 2005 7:48 pm

Dave wrote:It's like tnf in a Kracus thread

i'll gut you

Post by **Dave** » Sat Aug 13, 2005 7:58 pm

Try it, I know where you work

Post by **JulesWinnfield** » Sat Aug 13, 2005 7:59 pm

CDs are for suckers.

Post by **+JuggerNaut+** » Sat Aug 13, 2005 8:04 pm

Dave wrote:Try it, I know where you work

Post by **Dave** » Sat Aug 13, 2005 8:05 pm

One good threat deserves another

Post by **+JuggerNaut+** » Sat Aug 13, 2005 8:08 pm

Dave wrote:One good threat deserves another

:icon30:

Post by **bitWISE** » Sat Aug 13, 2005 9:17 pm

+JuggerNaut+ wrote:
bitWISE wrote:
+JuggerNaut+ wrote:difference between brand name HU's, sound quality wise, is pretty non-existant. do you know if they were both 2v pre-outs?

p.s. i wouldn't bother with a new amp unless you wanted more power. Punch amps have pretty good sound. the newer ones won't sound any better.
I just dont like the way its setup. I mainly want to have remote control of the gain. Plus if I manage to get a W7 I'll need more power.

I'm not using amps to run my full range speakers (yet). I always use the head unit. Could be that I had better imaging in the Probe or it could be that I prefer a 6.5 component set over a 3-way 6x9 component set.
remote control gain? why? get an HU that's got sub level controls. if you have a 4v or > pre-out, your gain adjusting days are over anyway.

i'm not understanding your comment about a 6.5 component set. do you mean that you prefer one with the built in amplification?

My Clarion had amp control but the kenwood doesnt. What I mean is that in my Probe I had 2 sets of 6.5 components by Infinity. In the Eclipse I have a 6.5 and a 6x9 component set by Infinity. I thought it sounded better in the Probe.

Post by **Denz** » Sat Aug 13, 2005 9:33 pm

I wonder if he is ever going to come back and say he got it fixed or he had to go get a new deck?

Post by **+JuggerNaut+** » Sat Aug 13, 2005 10:52 pm

bitWISE wrote:
+JuggerNaut+ wrote:
bitWISE wrote: I just dont like the way its setup. I mainly want to have remote control of the gain. Plus if I manage to get a W7 I'll need more power.

I'm not using amps to run my full range speakers (yet). I always use the head unit. Could be that I had better imaging in the Probe or it could be that I prefer a 6.5 component set over a 3-way 6x9 component set.
remote control gain? why? get an HU that's got sub level controls. if you have a 4v or > pre-out, your gain adjusting days are over anyway.

i'm not understanding your comment about a 6.5 component set. do you mean that you prefer one with the built in amplification?
My Clarion had amp control but the kenwood doesnt. What I mean is that in my Probe I had 2 sets of 6.5 components by Infinity. In the Eclipse I have a 6.5 and a 6x9 component set by Infinity. I thought it sounded better in the Probe.

yeah, totally depends on the car and placement of speakers, especailly the god-awful stock placements of most vehicles.

Post by **Zerofactor** » Sun Aug 14, 2005 1:20 am

Sorry, I fell asleep and didn't wake up till now

I'll try those Amp connectors, but I'll probably end up returning the stupid thing. Arg.