Quake3World

Tries to insert the fog in the yellow boxes in the photo, but without the negative effect of transitions between consecutive fog brushes. As you know in Lava / Slime / water / you can use (watercault / slimecaulk etc) while the fog is different.
Inserting 1 fog brush will fix the problem, but the fog will be poured out of the walls.
1. What can you work around somehow errors caused by inserting the fog in 3 brushes next to each other of different sizes?
Or
2. Can I insert one fog brush with different polygon shapes?

I checked for a while and I would not do without changing the geometry of the terrain.

Fog is always a bit bitchy. I don't think fogs work correctly if the fog-brush has a non axial shape.

If the fog pit is not a perfect rectangle I use a tub made from caulk with the fog fitting perfectly inside. Then just 'dipping' the map into the tub.

[lvlshot]http://sst13.net/pics/fog-tub.png[/lvlshot]

But this doesn't solve your problem. :paranoid:

I remember darkly a turorial for multi-volume fog with some kind of fog caulk between the fog brushes. But I have never tried it and can't find anything about this method online.