RAM Question (RDRAM)
Posted: Tue Jan 03, 2006 6:24 am
So I am currently into upgrading my computer so it gets better performance. I want to upgrade from my lowly 256mb of ram to 512, or a gig. When investigating the issue i found out that my computer uses RDRAM which seems to be WAAAY more expensive then SDRAM. I would have to pay about 400$-300$ for RDRAM when the SDRAM would be around 70 or 80 bucks, much more reasonable.
My question is as follows.....Do i have to use RDRAM, or can i switch it all out for SDRAM? I know nothing about this stuff so bare with me. Would that totally fuck my PC up, do i HAVE TO use the RDRAM? Basically I wanna know how I can make it possible to upgrade using SDRAM so as to not have to pay ridiculous prices.
Even on the DELL site when i say upgrade memory they only try to sell me the uber expensive RDRAM.
MY computer is a dell dimension 8200 running windows XP with the following specs:
Microprocessor
Microprocessor type
Intel® Pentium® 4 microprocessor
1.50, 1.60, 1.80, 1.90, 2.00, 2.20, or 2.40 GHz (400 MHz); or
2.26, 2.40, 2.53, 2.66, or 2.80 GHz (533 MHz)
L1 cache
8 KB first-level
L2 cache
256-KB or 512-KB (displayed in the system setup program) pipelined-burst, eight-way set associative, write-back SRAM
System Information
System chip set
Intel 850 or 850E
DMA channels
eight
Interrupt levels
15
System BIOS chip
4 Mb (512 KB)
System clock
400- or 533- MHz data rate
Expansion Bus
Bus types
PCI and AGP
Bus speed
PCI: 33 MHz; AGP: 66 MHz
AGP connector
one
AGP connector size
172 pins
AGP connector data width (maximum)
32 bits
AGP bus protocols
4x/2x modes at 1.5 V
PCI connectors
four
PCI connector size
120 pins
PCI connector data width
(maximum)
32 bits
Memory
Architecture
RDRAM
Memory connectors
four
Memory capacities
64-, 128-, 256-, and 512-MB non-ECC RDRAM
Minimum memory
128 MB
Maximum memory
2 GB with Microsoft® Windows® 2000 and Windows XP; 512 MB with Windows Millennium Edition (Me)
Memory type
PC800 (non-ECC)
Memory speed
40 ns or faster
BIOS address
F8000h
Drives
Externally accessible
two 5.25-inch bays
two 3.5-inch bays
Internally accessible
two bays for 1-inch–high IDE hard drives
Available devices
ATA-66 or ATA-100 Ultra DMA hard drive, CD drive, Zip drive, DVD drive, and CD-RW drive
Ports and Connectors
Externally accessible:
Serial
9-pin connector; 16550C-compatible
Parallel
25-hole connector (bidirectional)
Video
15-hole connector
Keyboard
6-pin mini-DIN connector or USB connector
Mouse
6-pin mini-DIN connector or USB connector
USB
two front-panel and two back-panel USB–compliant connectors
Headphone
front-panel miniature jack
Audio1
three miniature jacks for line-in, line-out, and microphone
Internally accessible:
Primary IDE channel
40-pin connector on PCI local bus
Secondary IDE channel
40-pin connector on PCI local bus
Floppy drive
34-pin connector
1 Present only on computers with integrated audio capabilities.
Audio2
Audio controller
Analog Devices AD1885 AC97 Codec
2 Present only on computers with integrated audio capabilities.
Video
Video controller
AGP 4X
ANY help is appreciated, thanks in advance.
My question is as follows.....Do i have to use RDRAM, or can i switch it all out for SDRAM? I know nothing about this stuff so bare with me. Would that totally fuck my PC up, do i HAVE TO use the RDRAM? Basically I wanna know how I can make it possible to upgrade using SDRAM so as to not have to pay ridiculous prices.
Even on the DELL site when i say upgrade memory they only try to sell me the uber expensive RDRAM.
MY computer is a dell dimension 8200 running windows XP with the following specs:
Microprocessor
Microprocessor type
Intel® Pentium® 4 microprocessor
1.50, 1.60, 1.80, 1.90, 2.00, 2.20, or 2.40 GHz (400 MHz); or
2.26, 2.40, 2.53, 2.66, or 2.80 GHz (533 MHz)
L1 cache
8 KB first-level
L2 cache
256-KB or 512-KB (displayed in the system setup program) pipelined-burst, eight-way set associative, write-back SRAM
System Information
System chip set
Intel 850 or 850E
DMA channels
eight
Interrupt levels
15
System BIOS chip
4 Mb (512 KB)
System clock
400- or 533- MHz data rate
Expansion Bus
Bus types
PCI and AGP
Bus speed
PCI: 33 MHz; AGP: 66 MHz
AGP connector
one
AGP connector size
172 pins
AGP connector data width (maximum)
32 bits
AGP bus protocols
4x/2x modes at 1.5 V
PCI connectors
four
PCI connector size
120 pins
PCI connector data width
(maximum)
32 bits
Memory
Architecture
RDRAM
Memory connectors
four
Memory capacities
64-, 128-, 256-, and 512-MB non-ECC RDRAM
Minimum memory
128 MB
Maximum memory
2 GB with Microsoft® Windows® 2000 and Windows XP; 512 MB with Windows Millennium Edition (Me)
Memory type
PC800 (non-ECC)
Memory speed
40 ns or faster
BIOS address
F8000h
Drives
Externally accessible
two 5.25-inch bays
two 3.5-inch bays
Internally accessible
two bays for 1-inch–high IDE hard drives
Available devices
ATA-66 or ATA-100 Ultra DMA hard drive, CD drive, Zip drive, DVD drive, and CD-RW drive
Ports and Connectors
Externally accessible:
Serial
9-pin connector; 16550C-compatible
Parallel
25-hole connector (bidirectional)
Video
15-hole connector
Keyboard
6-pin mini-DIN connector or USB connector
Mouse
6-pin mini-DIN connector or USB connector
USB
two front-panel and two back-panel USB–compliant connectors
Headphone
front-panel miniature jack
Audio1
three miniature jacks for line-in, line-out, and microphone
Internally accessible:
Primary IDE channel
40-pin connector on PCI local bus
Secondary IDE channel
40-pin connector on PCI local bus
Floppy drive
34-pin connector
1 Present only on computers with integrated audio capabilities.
Audio2
Audio controller
Analog Devices AD1885 AC97 Codec
2 Present only on computers with integrated audio capabilities.
Video
Video controller
AGP 4X
ANY help is appreciated, thanks in advance.